MICROENGRAVE – ME3 INTERFACE
Description
An interface box that runs Gravograph VX tables from a PC.
The ME3 effectively upgrades your VX table to an IS machine
Easy to use with instructions laid out in a step by step format
PLEASE NOTE – this unit can replace or work alongside your existing VX controller. It does not replace the power rack element of your table.
If your power rack is faulty please look at the ME3 controller.
Requirements
A PC with a Windows operating system and a design package such as Gravostyle 98/ 5, Vectric Vcarve, Engravelab, etc.
Specification
Voltage input 90 ~ 270 Volts AC
DATA input via 9pin RS232 (COM) port - can be run from many USB to COM converters
OUTPUT to 3 axis + cutter motor on Gravograph VX tables or similar
(Table must have stepper motor drivers for interface box to work )
Data accepted, 2d or 3d HPGL files from software packages e.g.Gravostyle, Engravelab, Vectric V-carve etc.
Parts supplied
ME3 Interface control box
Mains voltage input lead
25 data extension lead ( ME3 to Table )
9 pin RS232 data lead ( Computer to ME3 )
Bridge software disk ( if you need to change the setting of the interface control)
Instruction book
Telephone support (English) if required.
